Mikrotik Router Access Point Setup Guide
Step 1: Connect to the Router
- Connect your computer to the Mikrotik Router using an Ethernet cable.
- Open a web browser and navigate to the Router's IP address (default is 192.168.88.1).
- Login with the default username and password (admin/admin).
Step 2: Configure the Wireless Interface
- Go to IP/Wireless/General and select the wireless interface you want to use as the access point.
- Enable the wireless interface and set the SSID to a unique and descriptive name.
- Set the wireless channel to an available channel (default is channel 1).
Step 3: Configure the AP in Bridge Mode
- Go to IP/Winbox and select the wireless interface you want to use as the access point.
- Click on Bridge and select Access Point as the bridge type.
- Set the bridge hash table to a suitable value (default is 16).
Step 4: Configure Security Settings
- Go to IP/Wireless/Security and select the security profile you want to use (WPA2 is recommended).
- Set the password to a strong and unique value.
- Configure the authentication method to WPA2-PSK).
Step 5: Configure IP Addresses and NAT (Optional)
Step 6: Save and Apply the Changes
Once you have completed all the steps, click the Apply button to save the changes.
Conclusion
This Mikrotik Router Access Point Setup Guide has shown you how to configure a basic WiFi 5 Access Point using a Mikrotik Router in a standalone setup. Remember to always follow the manufacturer's instructions and consult the Mikrotik documentation for more information.
